Zachodniopomorski Uniwersytet Technologiczny w Szczecinie

Administracja Centralna Uczelni - Wymiana międzynarodowa (S1)

Sylabus przedmiotu Introduction to polymer technology:

Informacje podstawowe

Kierunek studiów Wymiana międzynarodowa
Forma studiów studia stacjonarne Poziom pierwszego stopnia
Tytuł zawodowy absolwenta
Obszary studiów
Profil
Moduł
Przedmiot Introduction to polymer technology
Specjalność przedmiot wspólny
Jednostka prowadząca Katedra Technologii Materiałowych
Nauczyciel odpowiedzialny Sandra Paszkiewicz <Sandra.Paszkiewicz@zut.edu.pl>
Inni nauczyciele
ECTS (planowane) 3,0 ECTS (formy) 3,0
Forma zaliczenia zaliczenie Język angielski
Blok obieralny Grupa obieralna

Formy dydaktyczne

Forma dydaktycznaKODSemestrGodzinyECTSWagaZaliczenie
wykładyW1 15 1,00,50zaliczenie
laboratoriaL1 15 2,00,50zaliczenie

Wymagania wstępne

KODWymaganie wstępne
W-1No prerequisites needed.

Cele przedmiotu

KODCel modułu/przedmiotu
C-1Learning the methodology, conditions and technological basics of polymer modification to obtain improved performance properties

Treści programowe z podziałem na formy zajęć

KODTreść programowaGodziny
laboratoria
T-L-1Chemical modification of polymers. Acquaintance with synthesis procedure of polymers. Preparation of the samples (injection moulding). Study on chemical and physical properties of the modified polymer materials.15
15
wykłady
T-W-1Introduction into polymer materials: definitions: mer, polymer, plastcis, degradation Analysis on the processes taking place during the processing and operation of polymeric materials. Selection of the type of modification and modifier to the operational needs of the product.15
15

Obciążenie pracą studenta - formy aktywności

KODForma aktywnościGodziny
laboratoria
A-L-1Participation in the classes15
A-L-2Passing a colloquium2
A-L-3Preparation oneselves for the classes, tests and reports.33
50
wykłady
A-W-1Participation in the classes15
A-W-2Study on the literature10
25

Metody nauczania / narzędzia dydaktyczne

KODMetoda nauczania / narzędzie dydaktyczne
M-1Information lecture, practical classes: laboratory

Sposoby oceny

KODSposób oceny
S-1Ocena formująca: Note from the test/exam.

Zamierzone efekty uczenia się - wiedza

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WIMiM_1-_WM28_W01
As a result of the course, the student should be able to describe the types of polymers (definition, preparation procedures, processing of polymers etc.), the methods and purpose of polymer modification, distinguish between chemical and physical modification methods, and explain the various modification mechanisms.
C-1T-W-1M-1S-1

Zamierzone efekty uczenia się - umiejętności

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WIMiM_1-_WM28_U01
As a result of the course, the student should be able to analyse the processes taking place during the processing and exploitation of polymeric materials, select the type of modification to the operational needs of the product
C-1T-L-1M-1S-1

Zamierzone efekty uczenia się - inne kompetencje społeczne i personalne

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WIMiM_1-_WM28_K01
As a result of the course, the student will acquire the following attitudes: an active attitude towards the conditions of manufacturing polymer products, awareness of phenomena occurring in the material during production and operation.
C-1T-L-1M-1S-1

Kryterium oceny - wiedza

Efekt uczenia sięOcenaKryterium oceny
WM-WIMiM_1-_WM28_W01
As a result of the course, the student should be able to describe the types of polymers (definition, preparation procedures, processing of polymers etc.), the methods and purpose of polymer modification, distinguish between chemical and physical modification methods, and explain the various modification mechanisms.
2,0Student didn't pass the test/exam. Student did not achieve the intended learning outcomes
3,0Student has basic knowledge on polymer materials. Student achieved the intended learning outcomes on the grade 3,0.
3,5
4,0The student has well-established knowledge on modifcation methods, however he/she cannot establish which modification procedure will be the most appropriate (chemical or physical).
4,5
5,0Student knows the methods and purpose of polymer modification. Can estinguish which modification method is more accurate in specific situation.

Kryterium oceny - umiejętności

Efekt uczenia sięOcenaKryterium oceny
WM-WIMiM_1-_WM28_U01
As a result of the course, the student should be able to analyse the processes taking place during the processing and exploitation of polymeric materials, select the type of modification to the operational needs of the product
2,0Student didn't pass the test/exam. Student did not achieve the intended learning outcomes. Student didn't prepare the reports from the laboratory classes.
3,0Student has basic knowledge on the process taking place during the processing of polymer materials. Student achieved the intended learning outcomes on the grade 3,0.
3,5
4,0Student knows how to modify polymer materials. However student is not capable of selecting the type of modification to the perational needs of the final product.
4,5
5,0Student is acquainted with the processing techniques of polymer materials. Knows how to modify polymer materials. Knows how to select the type of modification to the perational needs of the final product.

Kryterium oceny - inne kompetencje społeczne i personalne

Efekt uczenia sięOcenaKryterium oceny
WM-WIMiM_1-_WM28_K01
As a result of the course, the student will acquire the following attitudes: an active attitude towards the conditions of manufacturing polymer products, awareness of phenomena occurring in the material during production and operation.
2,0Student did not achieve the intended learning outcomes.
3,0Student achieved the intended learning outcomes. The student is willing to work in a group on a given issue related to the processing of polymers.
3,5
4,0
4,5
5,0

Literatura podstawowa

  1. Sperling H.L., Introduction to Physical Polymer Science, Wiley, 2006
  2. T.R. Crompton, Characterisation of polymers, Smithers Rapra Technology Limited, 2008
  3. J. R. Fried, Polymer Science and Technology, Professional Technical Reference, 2003

Literatura dodatkowa

  1. Various authors, Recent papers on polymer modification procedures (chemical and physical) found on www.sciencedirect.com, 2019

Treści programowe - laboratoria

KODTreść programowaGodziny
T-L-1Chemical modification of polymers. Acquaintance with synthesis procedure of polymers. Preparation of the samples (injection moulding). Study on chemical and physical properties of the modified polymer materials.15
15

Treści programowe - wykłady

KODTreść programowaGodziny
T-W-1Introduction into polymer materials: definitions: mer, polymer, plastcis, degradation Analysis on the processes taking place during the processing and operation of polymeric materials. Selection of the type of modification and modifier to the operational needs of the product.15
15

Formy aktywności - laboratoria

KODForma aktywnościGodziny
A-L-1Participation in the classes15
A-L-2Passing a colloquium2
A-L-3Preparation oneselves for the classes, tests and reports.33
50
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta

Formy aktywności - wykłady

KODForma aktywnościGodziny
A-W-1Participation in the classes15
A-W-2Study on the literature10
25
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięWM-WIMiM_1-_WM28_W01As a result of the course, the student should be able to describe the types of polymers (definition, preparation procedures, processing of polymers etc.), the methods and purpose of polymer modification, distinguish between chemical and physical modification methods, and explain the various modification mechanisms.
Cel przedmiotuC-1Learning the methodology, conditions and technological basics of polymer modification to obtain improved performance properties
Treści programoweT-W-1Introduction into polymer materials: definitions: mer, polymer, plastcis, degradation Analysis on the processes taking place during the processing and operation of polymeric materials. Selection of the type of modification and modifier to the operational needs of the product.
Metody nauczaniaM-1Information lecture, practical classes: laboratory
Sposób ocenyS-1Ocena formująca: Note from the test/exam.
Kryteria ocenyOcenaKryterium oceny
2,0Student didn't pass the test/exam. Student did not achieve the intended learning outcomes
3,0Student has basic knowledge on polymer materials. Student achieved the intended learning outcomes on the grade 3,0.
3,5
4,0The student has well-established knowledge on modifcation methods, however he/she cannot establish which modification procedure will be the most appropriate (chemical or physical).
4,5
5,0Student knows the methods and purpose of polymer modification. Can estinguish which modification method is more accurate in specific situation.
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięWM-WIMiM_1-_WM28_U01As a result of the course, the student should be able to analyse the processes taking place during the processing and exploitation of polymeric materials, select the type of modification to the operational needs of the product
Cel przedmiotuC-1Learning the methodology, conditions and technological basics of polymer modification to obtain improved performance properties
Treści programoweT-L-1Chemical modification of polymers. Acquaintance with synthesis procedure of polymers. Preparation of the samples (injection moulding). Study on chemical and physical properties of the modified polymer materials.
Metody nauczaniaM-1Information lecture, practical classes: laboratory
Sposób ocenyS-1Ocena formująca: Note from the test/exam.
Kryteria ocenyOcenaKryterium oceny
2,0Student didn't pass the test/exam. Student did not achieve the intended learning outcomes. Student didn't prepare the reports from the laboratory classes.
3,0Student has basic knowledge on the process taking place during the processing of polymer materials. Student achieved the intended learning outcomes on the grade 3,0.
3,5
4,0Student knows how to modify polymer materials. However student is not capable of selecting the type of modification to the perational needs of the final product.
4,5
5,0Student is acquainted with the processing techniques of polymer materials. Knows how to modify polymer materials. Knows how to select the type of modification to the perational needs of the final product.
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięWM-WIMiM_1-_WM28_K01As a result of the course, the student will acquire the following attitudes: an active attitude towards the conditions of manufacturing polymer products, awareness of phenomena occurring in the material during production and operation.
Cel przedmiotuC-1Learning the methodology, conditions and technological basics of polymer modification to obtain improved performance properties
Treści programoweT-L-1Chemical modification of polymers. Acquaintance with synthesis procedure of polymers. Preparation of the samples (injection moulding). Study on chemical and physical properties of the modified polymer materials.
Metody nauczaniaM-1Information lecture, practical classes: laboratory
Sposób ocenyS-1Ocena formująca: Note from the test/exam.
Kryteria ocenyOcenaKryterium oceny
2,0Student did not achieve the intended learning outcomes.
3,0Student achieved the intended learning outcomes. The student is willing to work in a group on a given issue related to the processing of polymers.
3,5
4,0
4,5
5,0