Zachodniopomorski Uniwersytet Technologiczny w Szczecinie

Wydział Technologii i Inżynierii Chemicznej - Materials Science and Engineering (S1)

Sylabus przedmiotu Adhesives and Coatings:

Informacje podstawowe

Kierunek studiów Materials Science and Engineering
Forma studiów studia stacjonarne Poziom pierwszego stopnia
Tytuł zawodowy absolwenta inżynier
Obszary studiów charakterystyki PRK, kompetencje inżynierskie PRK
Profil ogólnoakademicki
Moduł
Przedmiot Adhesives and Coatings
Specjalność przedmiot wspólny
Jednostka prowadząca Katedra Technologii Chemicznej Organicznej i Materiałów Polimerowych
Nauczyciel odpowiedzialny Zbigniew Czech <psa_czech@wp.pl>
Inni nauczyciele
ECTS (planowane) 5,0 ECTS (formy) 5,0
Forma zaliczenia zaliczenie Język angielski
Blok obieralny Grupa obieralna

Formy dydaktyczne

Forma dydaktycznaKODSemestrGodzinyECTSWagaZaliczenie
wykładyW6 15 2,00,25zaliczenie
laboratoriaL6 45 3,00,75zaliczenie

Wymagania wstępne

KODWymaganie wstępne
W-1Fundamentals of chemistry and materials science, presented in previous courses in this field of study.

Cele przedmiotu

KODCel modułu/przedmiotu
C-1The aim of the course is to get knowledge and skills in the field of technology of adhesives and coatings used in present-day industry.

Treści programowe z podziałem na formy zajęć

KODTreść programowaGodziny
laboratoria
T-L-1Preparation and application of a solvent-borne polyurethane paint.5
T-L-2Preparation and application of a waterborne paint5
T-L-3Application of a powder coating. Testing of the prepared varnish and paint coatings.5
T-L-4Preparation and application of inks and coatings for modification of polymer films.5
T-L-5Preparation and application of inks and coatings for modification of cellulosic material coating.5
T-L-6Characteristion of coated polymer films and cellulosic materials for modified packaging materials.5
T-L-7Crosslinking of solvent-based pressure-sensitive adhesive acrylics using UV-C lamp.5
T-L-8Manufacturing of one-sided and double-sided tapes based on solvent-free low viscosity adhesives.5
T-L-9UV-initiated polymerization of typical adhesive monomers.5
45
wykłady
T-W-1Definitions of a varnish, paint, adhesive, binder, film forming substance, pigment, micro- and nanofiller, solvent, diluent.1
T-W-2Characterization of the most popular binders, micro- and nanofillers, pigments (decorative, anticorrosive), solvents and coating additives.4
T-W-3Preparation and application methods of coating compositions.2
T-W-4Historical development of adhesives and sealants, from ancient times to modern technology. Theories and mechanisms of adhesion.2
T-W-5Types of commonly used adhesives based on polymers ((hot-melt adhesives, contact adhesives, solvent type adhesives, dispersed adhesives, pressure-sensitive adhesives ) and their application.2
T-W-6Adhesives for special applications. Pressure-sensitive adhesives technology and their application in many branches of modern industry2
T-W-7Physical and chemical testing and analysis of adhesives – methods and procedures.2
15

Obciążenie pracą studenta - formy aktywności

KODForma aktywnościGodziny
laboratoria
A-L-1Participation in laboratory exercises.45
A-L-2Self-study of the literature30
A-L-3Consultations15
90
wykłady
A-W-1Participation in lectures15
A-W-2Self-study of the literature30
A-W-3Consultations15
60

Metody nauczania / narzędzia dydaktyczne

KODMetoda nauczania / narzędzie dydaktyczne
M-1Lecture
M-2Laboratory exercises

Sposoby oceny

KODSposób oceny
S-1Ocena podsumowująca: Written test

Zamierzone efekty uczenia się - wiedza

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaOdniesienie do efektów uczenia się prowadzących do uzyskania tytułu zawodowego inżynieraCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
MSE_1A_C20_W01
The student has a knowledge about technology of adhesives and self adhesive materials, coatings, and fillers, solvents and film forming polymers as well as modern auxiliary agents for coatings, paints and varnishes.
MSE_1A_W03, MSE_1A_W04C-1T-W-1, T-W-2, T-W-3, T-W-4, T-W-5, T-W-6, T-W-7M-1S-1

Zamierzone efekty uczenia się - umiejętności

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaOdniesienie do efektów uczenia się prowadzących do uzyskania tytułu zawodowego inżynieraCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
MSE_1A_C20_U01
The student has skills in the field of modern coatings and adhesives, including preparation, purification, application methods, analysis and practical testing of their properties.
MSE_1A_U01, MSE_1A_U08C-1T-L-1, T-L-2, T-L-3, T-L-4, T-L-5, T-L-6, T-L-7, T-L-8, T-L-9M-2S-1

Zamierzone efekty uczenia się - inne kompetencje społeczne i personalne

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaOdniesienie do efektów uczenia się prowadzących do uzyskania tytułu zawodowego inżynieraCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
MSE_1A_C20_K01
The student understands the role of modern, environmentally friendly technologies in the field of adhesives, self-adhesive materials and coatings.
MSE_1A_K01, MSE_1A_K02C-1T-W-1, T-W-2, T-W-3, T-W-4, T-W-5, T-W-6, T-W-7, T-L-1, T-L-2, T-L-3, T-L-4, T-L-5, T-L-6, T-L-7, T-L-8, T-L-9M-1, M-2S-1

Kryterium oceny - wiedza

Efekt uczenia sięOcenaKryterium oceny
MSE_1A_C20_W01
The student has a knowledge about technology of adhesives and self adhesive materials, coatings, and fillers, solvents and film forming polymers as well as modern auxiliary agents for coatings, paints and varnishes.
2,0
3,0Student describes selected issues at a basic level (score => 50%)
3,5
4,0
4,5
5,0

Kryterium oceny - umiejętności

Efekt uczenia sięOcenaKryterium oceny
MSE_1A_C20_U01
The student has skills in the field of modern coatings and adhesives, including preparation, purification, application methods, analysis and practical testing of their properties.
2,0
3,0Student describes selected issues at a basic level (score => 50%)
3,5
4,0
4,5
5,0

Kryterium oceny - inne kompetencje społeczne i personalne

Efekt uczenia sięOcenaKryterium oceny
MSE_1A_C20_K01
The student understands the role of modern, environmentally friendly technologies in the field of adhesives, self-adhesive materials and coatings.
2,0
3,0Student describes selected issues at a basic level (score => 50%)
3,5
4,0
4,5
5,0

Literatura podstawowa

  1. J. Koleske, Paint and coating testing manual, ASTM, Philadelphia, 1995
  2. J.H. Koo, Polymer nanocomposites, The McGraw-Hill Comp., New York, 2006
  3. Z. Wicks, F. Jones, Organic coatings, John Wiley&Sons, Hoboken, 2007
  4. A. Pizzi, K.L. Mittal (editors), Handbook of Adhesive Technology, Marcel Dekker Inc., New York - Basel, 2003, 2nd Ed.
  5. I. Benedek, Pressure-Sensitive Adhesives and Application, Marcel Dekker Inc., New York - Basel, 2004, 2nd Ed.
  6. Z. Czech, D. Sowa, Adhesion of Pressure-Sensitive Adhesives, Especially of Solvent-Based PSA, WPUT Szczecin Publishing House, Szczecin, 2016

Treści programowe - laboratoria

KODTreść programowaGodziny
T-L-1Preparation and application of a solvent-borne polyurethane paint.5
T-L-2Preparation and application of a waterborne paint5
T-L-3Application of a powder coating. Testing of the prepared varnish and paint coatings.5
T-L-4Preparation and application of inks and coatings for modification of polymer films.5
T-L-5Preparation and application of inks and coatings for modification of cellulosic material coating.5
T-L-6Characteristion of coated polymer films and cellulosic materials for modified packaging materials.5
T-L-7Crosslinking of solvent-based pressure-sensitive adhesive acrylics using UV-C lamp.5
T-L-8Manufacturing of one-sided and double-sided tapes based on solvent-free low viscosity adhesives.5
T-L-9UV-initiated polymerization of typical adhesive monomers.5
45

Treści programowe - wykłady

KODTreść programowaGodziny
T-W-1Definitions of a varnish, paint, adhesive, binder, film forming substance, pigment, micro- and nanofiller, solvent, diluent.1
T-W-2Characterization of the most popular binders, micro- and nanofillers, pigments (decorative, anticorrosive), solvents and coating additives.4
T-W-3Preparation and application methods of coating compositions.2
T-W-4Historical development of adhesives and sealants, from ancient times to modern technology. Theories and mechanisms of adhesion.2
T-W-5Types of commonly used adhesives based on polymers ((hot-melt adhesives, contact adhesives, solvent type adhesives, dispersed adhesives, pressure-sensitive adhesives ) and their application.2
T-W-6Adhesives for special applications. Pressure-sensitive adhesives technology and their application in many branches of modern industry2
T-W-7Physical and chemical testing and analysis of adhesives – methods and procedures.2
15

Formy aktywności - laboratoria

KODForma aktywnościGodziny
A-L-1Participation in laboratory exercises.45
A-L-2Self-study of the literature30
A-L-3Consultations15
90
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta

Formy aktywności - wykłady

KODForma aktywnościGodziny
A-W-1Participation in lectures15
A-W-2Self-study of the literature30
A-W-3Consultations15
60
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięMSE_1A_C20_W01The student has a knowledge about technology of adhesives and self adhesive materials, coatings, and fillers, solvents and film forming polymers as well as modern auxiliary agents for coatings, paints and varnishes.
Odniesienie do efektów kształcenia dla kierunku studiówMSE_1A_W03knows selected issues concerning the structure of materials, thier synthesis, processing and structure-properties relationship
MSE_1A_W04knows and understands the application potential of various materials
Cel przedmiotuC-1The aim of the course is to get knowledge and skills in the field of technology of adhesives and coatings used in present-day industry.
Treści programoweT-W-1Definitions of a varnish, paint, adhesive, binder, film forming substance, pigment, micro- and nanofiller, solvent, diluent.
T-W-2Characterization of the most popular binders, micro- and nanofillers, pigments (decorative, anticorrosive), solvents and coating additives.
T-W-3Preparation and application methods of coating compositions.
T-W-4Historical development of adhesives and sealants, from ancient times to modern technology. Theories and mechanisms of adhesion.
T-W-5Types of commonly used adhesives based on polymers ((hot-melt adhesives, contact adhesives, solvent type adhesives, dispersed adhesives, pressure-sensitive adhesives ) and their application.
T-W-6Adhesives for special applications. Pressure-sensitive adhesives technology and their application in many branches of modern industry
T-W-7Physical and chemical testing and analysis of adhesives – methods and procedures.
Metody nauczaniaM-1Lecture
Sposób ocenyS-1Ocena podsumowująca: Written test
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Student describes selected issues at a basic level (score => 50%)
3,5
4,0
4,5
5,0
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięMSE_1A_C20_U01The student has skills in the field of modern coatings and adhesives, including preparation, purification, application methods, analysis and practical testing of their properties.
Odniesienie do efektów kształcenia dla kierunku studiówMSE_1A_U01being able to use the acquired knowledge related to the engineering of materials to formulate and solve comples and unusual engineering tasks with respect to: - proper selection of sources and information, assessment, critical analysis and synthesis of this information, - selection and application of appropriate methods and tools, including advanced information and communication techniques
MSE_1A_U08being able to plan and execute processes of manufacturing of selected materials
Cel przedmiotuC-1The aim of the course is to get knowledge and skills in the field of technology of adhesives and coatings used in present-day industry.
Treści programoweT-L-1Preparation and application of a solvent-borne polyurethane paint.
T-L-2Preparation and application of a waterborne paint
T-L-3Application of a powder coating. Testing of the prepared varnish and paint coatings.
T-L-4Preparation and application of inks and coatings for modification of polymer films.
T-L-5Preparation and application of inks and coatings for modification of cellulosic material coating.
T-L-6Characteristion of coated polymer films and cellulosic materials for modified packaging materials.
T-L-7Crosslinking of solvent-based pressure-sensitive adhesive acrylics using UV-C lamp.
T-L-8Manufacturing of one-sided and double-sided tapes based on solvent-free low viscosity adhesives.
T-L-9UV-initiated polymerization of typical adhesive monomers.
Metody nauczaniaM-2Laboratory exercises
Sposób ocenyS-1Ocena podsumowująca: Written test
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Student describes selected issues at a basic level (score => 50%)
3,5
4,0
4,5
5,0
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięMSE_1A_C20_K01The student understands the role of modern, environmentally friendly technologies in the field of adhesives, self-adhesive materials and coatings.
Odniesienie do efektów kształcenia dla kierunku studiówMSE_1A_K01is able to critically assess the knowledge and content received
MSE_1A_K02acknowledges the importance of knowledge in solving cognitive and practical problems and is able to consult with experts if it is difficult to solve the problem on its own
Cel przedmiotuC-1The aim of the course is to get knowledge and skills in the field of technology of adhesives and coatings used in present-day industry.
Treści programoweT-W-1Definitions of a varnish, paint, adhesive, binder, film forming substance, pigment, micro- and nanofiller, solvent, diluent.
T-W-2Characterization of the most popular binders, micro- and nanofillers, pigments (decorative, anticorrosive), solvents and coating additives.
T-W-3Preparation and application methods of coating compositions.
T-W-4Historical development of adhesives and sealants, from ancient times to modern technology. Theories and mechanisms of adhesion.
T-W-5Types of commonly used adhesives based on polymers ((hot-melt adhesives, contact adhesives, solvent type adhesives, dispersed adhesives, pressure-sensitive adhesives ) and their application.
T-W-6Adhesives for special applications. Pressure-sensitive adhesives technology and their application in many branches of modern industry
T-W-7Physical and chemical testing and analysis of adhesives – methods and procedures.
T-L-1Preparation and application of a solvent-borne polyurethane paint.
T-L-2Preparation and application of a waterborne paint
T-L-3Application of a powder coating. Testing of the prepared varnish and paint coatings.
T-L-4Preparation and application of inks and coatings for modification of polymer films.
T-L-5Preparation and application of inks and coatings for modification of cellulosic material coating.
T-L-6Characteristion of coated polymer films and cellulosic materials for modified packaging materials.
T-L-7Crosslinking of solvent-based pressure-sensitive adhesive acrylics using UV-C lamp.
T-L-8Manufacturing of one-sided and double-sided tapes based on solvent-free low viscosity adhesives.
T-L-9UV-initiated polymerization of typical adhesive monomers.
Metody nauczaniaM-1Lecture
M-2Laboratory exercises
Sposób ocenyS-1Ocena podsumowująca: Written test
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Student describes selected issues at a basic level (score => 50%)
3,5
4,0
4,5
5,0