Zachodniopomorski Uniwersytet Technologiczny w Szczecinie

Wydział Inżynierii Mechanicznej i Mechatroniki - Materials Engineering (S2)

Sylabus przedmiotu Work Placement:

Informacje podstawowe

Kierunek studiów Materials Engineering
Forma studiów studia stacjonarne Poziom drugiego stopnia
Tytuł zawodowy absolwenta magister inżynier
Obszary studiów charakterystyki PRK, kompetencje inżynierskie PRK
Profil ogólnoakademicki
Moduł
Przedmiot Work Placement
Specjalność przedmiot wspólny
Jednostka prowadząca Katedra Zarządzania Produkcją
Nauczyciel odpowiedzialny Eliza Jarysz-Kamińska <Eliza.Jarysz@zut.edu.pl>
Inni nauczyciele
ECTS (planowane) 4,0 ECTS (formy) 4,0
Forma zaliczenia zaliczenie Język polski
Blok obieralny Grupa obieralna

Formy dydaktyczne

Forma dydaktycznaKODSemestrGodzinyECTSWagaZaliczenie
praktykiPR3 4 4,01,00zaliczenie

Wymagania wstępne

KODWymaganie wstępne
W-1The student is familiarised with the applicable rules of the work placement.
W-2The student receives a referral to the work placement.
W-3The obligation to the student of the accident insurance.
W-4Conclusion of an agreement between the university and the institution in which the work placement is carried out by the student.

Cele przedmiotu

KODCel modułu/przedmiotu
C-1Getting familiar with the rules of safety and health at the work placement.
C-2Getting familiar with the organizational structure of the institution. Organizational charts of the company sections, the research unit.
C-3Getting familiar with the organization and functioning of the department for planning the products manufacture.
C-4Getting familiar with the organization rules of the technology department (documentation, examination of tenders, design).
C-5Getting familiar with the practical aspects of processes carried out in the institution.
C-6Practical application of knowledge and skills acquired during the studies in practice.

Treści programowe z podziałem na formy zajęć

KODTreść programowaGodziny
praktyki
T-PR-1Getting to know the organizational structure and the management of a manufacturing company. Getting to know the functioning of the technology department (documentation, standards, orders).1
T-PR-2Getting familiar with the materials used in the production of products (according to the specifications of the institution).1
T-PR-3Getting familiar with the methods and tools used to produce polymer materials, metal products and their finished products and getting to know the principles of the research laboratory operation within the institution section of the production control.1
T-PR-4The principles of health and safety at work - general provisions and industry regulations. Analysis of the health and safety rules application in the institution, in which the work placement is implemented.1
4

Obciążenie pracą studenta - formy aktywności

KODForma aktywnościGodziny
praktyki
A-PR-1Health and safety training.8
A-PR-2Introduction to the subject of the tasks.6
A-PR-3Implementation of the work placement tasks, compatible substantively with at least one point of the work placement for the material engineering faculty.70
A-PR-4Recording the work placement tasks in the form of the student practice journal.6
A-PR-5Preparing a study on the use of general and specific health and safety regulations in the company.30
120

Metody nauczania / narzędzia dydaktyczne

KODMetoda nauczania / narzędzie dydaktyczne
M-1Informational meeting to get students acquainted with the rules in force during the implementation of the program work placement in the material engineering faculty. The meeting is carried out by the dean’s representative for the work placement.

Sposoby oceny

KODSposób oceny
S-1Ocena podsumowująca: Assessment of the student work based on the grade at the work placement issued by the direct supervisor at the work placement as well as the verification of the student practice journal and confirmation of the work placement implementation by the dean’s representative for the work placement.
S-2Ocena podsumowująca: Possibility of work towards the work placement.

Zamierzone efekty uczenia się - wiedza

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaOdniesienie do efektów uczenia się prowadzących do uzyskania tytułu zawodowego inżynieraCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
IM_2A_P01_W01
The student has knowledge in the field of quality, health and safety at work, and knowledge on the tasks performed at the work placement.
ME_2A_W05, ME_2A_W06C-1, C-2, C-3, C-4, C-5, C-6T-PR-1, T-PR-2, T-PR-3M-1S-1, S-2

Zamierzone efekty uczenia się - umiejętności

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaOdniesienie do efektów uczenia się prowadzących do uzyskania tytułu zawodowego inżynieraCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
IM_2A_P01_U01
The student has knowledge in the field of quality, health and safety at work, and knowledge on the tasks performed at the work placement.
ME_2A_U13, ME_2A_U02, ME_2A_U06C-1, C-2, C-3, C-4, C-5, C-6T-PR-1, T-PR-2, T-PR-3M-1S-1, S-2

Zamierzone efekty uczenia się - inne kompetencje społeczne i personalne

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaOdniesienie do efektów uczenia się prowadzących do uzyskania tytułu zawodowego inżynieraCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
IM_2A_P01_K01
The student is able to work in a team.
ME_2A_K04C-1, C-2, C-3, C-4, C-5, C-6T-PR-1, T-PR-2, T-PR-3, T-PR-4M-1S-1, S-2

Kryterium oceny - wiedza

Efekt uczenia sięOcenaKryterium oceny
IM_2A_P01_W01
The student has knowledge in the field of quality, health and safety at work, and knowledge on the tasks performed at the work placement.
2,0
3,0Good basic knowledge concerning the tasks performed at the program work placement.
3,5
4,0
4,5
5,0

Kryterium oceny - umiejętności

Efekt uczenia sięOcenaKryterium oceny
IM_2A_P01_U01
The student has knowledge in the field of quality, health and safety at work, and knowledge on the tasks performed at the work placement.
2,0
3,0Basic ability to use the acquired knowledge in practice.
3,5
4,0
4,5
5,0

Kryterium oceny - inne kompetencje społeczne i personalne

Efekt uczenia sięOcenaKryterium oceny
IM_2A_P01_K01
The student is able to work in a team.
2,0
3,0The student reveals mediocre involvement in teamwork.
3,5
4,0
4,5
5,0

Literatura podstawowa

  1. Małgorzata Mrozik, Informacje w zakładce Praktyki na stronie wydziałowej: www.wimim.zut.edu.pl, 2014
  2. Koradecka D., Bezpieczeństwo pracy i ergonomia, Warszawa, 2011
  3. Rączkowski B., BHP w praktyce, Gdańsk, 2011
  4. Ustawa, Kodeks pracy, 2011

Treści programowe - praktyki

KODTreść programowaGodziny
T-PR-1Getting to know the organizational structure and the management of a manufacturing company. Getting to know the functioning of the technology department (documentation, standards, orders).1
T-PR-2Getting familiar with the materials used in the production of products (according to the specifications of the institution).1
T-PR-3Getting familiar with the methods and tools used to produce polymer materials, metal products and their finished products and getting to know the principles of the research laboratory operation within the institution section of the production control.1
T-PR-4The principles of health and safety at work - general provisions and industry regulations. Analysis of the health and safety rules application in the institution, in which the work placement is implemented.1
4

Formy aktywności - praktyki

KODForma aktywnościGodziny
A-PR-1Health and safety training.8
A-PR-2Introduction to the subject of the tasks.6
A-PR-3Implementation of the work placement tasks, compatible substantively with at least one point of the work placement for the material engineering faculty.70
A-PR-4Recording the work placement tasks in the form of the student practice journal.6
A-PR-5Preparing a study on the use of general and specific health and safety regulations in the company.30
120
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięIM_2A_P01_W01The student has knowledge in the field of quality, health and safety at work, and knowledge on the tasks performed at the work placement.
Odniesienie do efektów kształcenia dla kierunku studiówME_2A_W05Has knowledge of development trends and the most significant new achievements in materials engineering necessary for understanding advanced technological processes
ME_2A_W06Has knowledge necessary for understanding social, economic, legal and other extra-technological aspects of engineering activities and their application in practice
Cel przedmiotuC-1Getting familiar with the rules of safety and health at the work placement.
C-2Getting familiar with the organizational structure of the institution. Organizational charts of the company sections, the research unit.
C-3Getting familiar with the organization and functioning of the department for planning the products manufacture.
C-4Getting familiar with the organization rules of the technology department (documentation, examination of tenders, design).
C-5Getting familiar with the practical aspects of processes carried out in the institution.
C-6Practical application of knowledge and skills acquired during the studies in practice.
Treści programoweT-PR-1Getting to know the organizational structure and the management of a manufacturing company. Getting to know the functioning of the technology department (documentation, standards, orders).
T-PR-2Getting familiar with the materials used in the production of products (according to the specifications of the institution).
T-PR-3Getting familiar with the methods and tools used to produce polymer materials, metal products and their finished products and getting to know the principles of the research laboratory operation within the institution section of the production control.
Metody nauczaniaM-1Informational meeting to get students acquainted with the rules in force during the implementation of the program work placement in the material engineering faculty. The meeting is carried out by the dean’s representative for the work placement.
Sposób ocenyS-1Ocena podsumowująca: Assessment of the student work based on the grade at the work placement issued by the direct supervisor at the work placement as well as the verification of the student practice journal and confirmation of the work placement implementation by the dean’s representative for the work placement.
S-2Ocena podsumowująca: Possibility of work towards the work placement.
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Good basic knowledge concerning the tasks performed at the program work placement.
3,5
4,0
4,5
5,0
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięIM_2A_P01_U01The student has knowledge in the field of quality, health and safety at work, and knowledge on the tasks performed at the work placement.
Odniesienie do efektów kształcenia dla kierunku studiówME_2A_U13Can determine directions of further learning and carry out self-education
ME_2A_U02Can work individually and in team in a way ensuring completion of a task in planned time; can estimate how much time a tasks requires and its economic aspects
ME_2A_U06Can use learned mathematical methods and models - appropriately modifying them if needed – for analysis, design and optimisation of materials and/or technological processes and/or products
Cel przedmiotuC-1Getting familiar with the rules of safety and health at the work placement.
C-2Getting familiar with the organizational structure of the institution. Organizational charts of the company sections, the research unit.
C-3Getting familiar with the organization and functioning of the department for planning the products manufacture.
C-4Getting familiar with the organization rules of the technology department (documentation, examination of tenders, design).
C-5Getting familiar with the practical aspects of processes carried out in the institution.
C-6Practical application of knowledge and skills acquired during the studies in practice.
Treści programoweT-PR-1Getting to know the organizational structure and the management of a manufacturing company. Getting to know the functioning of the technology department (documentation, standards, orders).
T-PR-2Getting familiar with the materials used in the production of products (according to the specifications of the institution).
T-PR-3Getting familiar with the methods and tools used to produce polymer materials, metal products and their finished products and getting to know the principles of the research laboratory operation within the institution section of the production control.
Metody nauczaniaM-1Informational meeting to get students acquainted with the rules in force during the implementation of the program work placement in the material engineering faculty. The meeting is carried out by the dean’s representative for the work placement.
Sposób ocenyS-1Ocena podsumowująca: Assessment of the student work based on the grade at the work placement issued by the direct supervisor at the work placement as well as the verification of the student practice journal and confirmation of the work placement implementation by the dean’s representative for the work placement.
S-2Ocena podsumowująca: Possibility of work towards the work placement.
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Basic ability to use the acquired knowledge in practice.
3,5
4,0
4,5
5,0
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięIM_2A_P01_K01The student is able to work in a team.
Odniesienie do efektów kształcenia dla kierunku studiówME_2A_K04Can co-operate and work in team taking various roles and can appropriately set forth priorities serving the completion of a task determined by him/herself and others
Cel przedmiotuC-1Getting familiar with the rules of safety and health at the work placement.
C-2Getting familiar with the organizational structure of the institution. Organizational charts of the company sections, the research unit.
C-3Getting familiar with the organization and functioning of the department for planning the products manufacture.
C-4Getting familiar with the organization rules of the technology department (documentation, examination of tenders, design).
C-5Getting familiar with the practical aspects of processes carried out in the institution.
C-6Practical application of knowledge and skills acquired during the studies in practice.
Treści programoweT-PR-1Getting to know the organizational structure and the management of a manufacturing company. Getting to know the functioning of the technology department (documentation, standards, orders).
T-PR-2Getting familiar with the materials used in the production of products (according to the specifications of the institution).
T-PR-3Getting familiar with the methods and tools used to produce polymer materials, metal products and their finished products and getting to know the principles of the research laboratory operation within the institution section of the production control.
T-PR-4The principles of health and safety at work - general provisions and industry regulations. Analysis of the health and safety rules application in the institution, in which the work placement is implemented.
Metody nauczaniaM-1Informational meeting to get students acquainted with the rules in force during the implementation of the program work placement in the material engineering faculty. The meeting is carried out by the dean’s representative for the work placement.
Sposób ocenyS-1Ocena podsumowująca: Assessment of the student work based on the grade at the work placement issued by the direct supervisor at the work placement as well as the verification of the student practice journal and confirmation of the work placement implementation by the dean’s representative for the work placement.
S-2Ocena podsumowująca: Possibility of work towards the work placement.
Kryteria ocenyOcenaKryterium oceny
2,0
3,0The student reveals mediocre involvement in teamwork.
3,5
4,0
4,5
5,0